DIN Inclined Spacers (PN 10)
Flexible in every situation! The Inclined Spacers can be delivered in any angle, tapered on one side only or on both sides.
Material:
- PTFE (virgin or conductive)
Other pressure levels:
- PN 16
- PN 25
- PN 40
The standard angle for Inclined Spacer is 3°,
other angles on request.
DN
| L
(mm) | d2
≈ (mm) | d8
(mm) | Weights
(ca. kg/pc.) |
25 | 15 | 22 | 70 | 0.1 |
32 | 15 | 31 | 82 | 0.1 |
40 | 15 | 37 | 92 | 0.2 |
50 | 20 | 48 | 107 | 0.3 |
65 | 20 | 64 | 127 | 0.4 |
80 | 20 | 76 | 142 | 0.5 |
100 | 25 | 101 | 162 | 0.7 |
125 | 25 | 125 | 192 | 0.9 |
150 | 35 | 153 | 218 | 1.4 |
200 | 35 | 201 | 273 | 2.0 |
Different nominal pipe sizes and total lengths on request.
L = Total length
d2 = Inner diameter
d8 = Outer diameter
Technical data valid for the pressure level PN 10.
| DN | Lining thickness | Possible vacuum | |||
| standard | thick-walled | 23°C | 150°C | 200°C | |
| 25 |  | | | ||
| | | |||
| 40 | | | | ||
| | | |||
| 50 | | | | ||
| | | |||
| 80 | | | | ||
| | | |||
| 100 | | | | ||
| | | |||
| 150 | | | | ||
| | | |||
| 200 | | | | ||
| | | |||
Vacuum resistance:
| = | full vacuum |
 | = | limited vacuum |
 | = | no vacuum |
| Please refer to the next higher nominal pipe size if your nominal pipe size is not listed. | ||