DIN Flansch-Reduzierstücke konzentrisch (PN 10)
Die konzentrischen Flansch-Reduzierstücke sind die universelle Lösung für alle Querschnittsänderungen. In Abhängigkeit von der Nennweite sind die Flansch-Reduzierstücke mit PTFE, PFA oder PP ausgekleidet.
Werkstoffe:
- Normalstahl
- Edelstahl
Auskleidungswerkstoffe:
- PTFE (natur oder ableitfähig)
- PFA (natur oder ableitfähig)
- PP
Flansche nach DIN EN 1092-1:
- fest-fest
- fest-los
- los-los
Weitere Druckstufen:
- PN 16
- PN 25
- PN 40
Anbauten:
- Erdungsbolzen /-lasche
- Entlüftungshülse
Extras:
- Decklackierung
- zerstörungsfreie Prüfung
DN1
| DN2
| L
(mm) | d1(1)
(mm) | d4(1)
(mm) | K(1)
(mm) | smin(1)
(mm) | a1(1)
(mm) | a2(1)
(mm) | d1(2)
(mm) | d4(2)
(mm) | K(2)
(mm) | smin(2)
(mm) | a1(2)
(mm) | a2(2)
(mm) | Auskleidungswerkstoffe
| Schrauben | Gew. (ca. kg / St.) | |
DN1 | DN2 | |||||||||||||||||
20 | 15 | 125 | 26,9 | 58 | 75 | 3,0 | 21,0 | 33,0 | 26,9 | 45 | 65 | 3,0 | 19,0 | 29,0 | PTFE | 4 x M12 | 4 x M12 | 2,1 |
25 | 15 | 125 | 33,7 | 68 | 85 | 3,0 | 21,0 | 33,0 | 26,9 | 45 | 65 | 3,0 | 19,0 | 29,0 | PTFE | 4 x M12 | 4 x M12 | 2,3 |
25 | 20 | 125 | 33,7 | 68 | 85 | 3,0 | 21,0 | 33,0 | 26,9 | 58 | 75 | 3,0 | 21,0 | 33,0 | PTFE | 4 x M12 | 4 x M12 | 2,7 |
32 | 20 | 130 | 42,4 | 78 | 100 | 3,0 | 21,0 | 35,0 | 26,9 | 58 | 75 | 3,0 | 21,0 | 33,0 | PTFE | 4 x M16 | 4 x M12 | 3,4 |
32 | 25 | 130 | 42,4 | 78 | 100 | 3,0 | 21,0 | 35,0 | 33,7 | 68 | 85 | 3,0 | 21,0 | 33,0 | PTFE | 4 x M16 | 4 x M12 | 3,7 |
40 | 20 | 145 | 48,3 | 88 | 110 | 4,0 | 22,0 | 36,0 | 26,9 | 58 | 75 | 4,0 | 22,0 | 34,0 | PFA | 4 x M16 | 4 x M12 | 3,7 |
40 | 25 | 145 | 48,3 | 88 | 110 | 3,0 | 21,0 | 35,0 | 33,7 | 68 | 85 | 3,0 | 21,0 | 33,0 | PTFE | 4 x M16 | 4 x M12 | 4,0 |
40 | 32 | 150 | 48,3 | 88 | 110 | 3,0 | 21,0 | 35,0 | 42,4 | 78 | 100 | 3,0 | 21,0 | 35,0 | PTFE | 4 x M16 | 4 x M16 | 4,9 |
50 | 25 | 160 | 60,3 | 102 | 125 | 4,0 | 22,0 | 40,0 | 33,7 | 68 | 85 | 4,0 | 22,0 | 34,0 | PFA | 4 x M16 | 4 x M12 | 4,6 |
50 | 32 | 165 | 60,3 | 102 | 125 | 3,0 | 21,0 | 39,0 | 42,4 | 78 | 100 | 3,0 | 21,0 | 35,0 | PTFE | 4 x M16 | 4 x M16 | 5,5 |
50 | 40 | 165 | 60,3 | 102 | 125 | 3,0 | 21,0 | 39,0 | 48,3 | 88 | 110 | 3,0 | 21,0 | 35,0 | PTFE | 4 x M16 | 4 x M16 | 5,9 |
65 | 32 | 180 | 76,1 | 122 | 145 | 4,0 | 22,0 | 40,0 | 42,4 | 78 | 100 | 4,0 | 22,0 | 36,0 | PFA | 8 x M16 | 4 x M16 | 6,3 |
65 | 40 | 180 | 76,1 | 122 | 145 | 3,0 | 21,0 | 39,0 | 48,3 | 88 | 110 | 3,0 | 21,0 | 35,0 | PTFE | 8 x M16 | 4 x M16 | 6,7 |
65 | 50 | 185 | 76,1 | 122 | 145 | 3,0 | 21,0 | 39,0 | 60,3 | 102 | 125 | 3,0 | 21,0 | 39,0 | PTFE | 8 x M16 | 4 x M16 | 7,6 |
80 | 25 | 185 | 88,9 | 138 | 160 | 4,0 | 24,0 | 40,0 | 33,7 | 68 | 85 | 4,0 | 22,0 | 34,0 | PFA | 8 x M16 | 4 x M12 | 6,6 |
80 | 40 | 185 | 88,9 | 138 | 160 | 4,0 | 24,0 | 40,0 | 48,3 | 88 | 110 | 4,0 | 22,0 | 36,0 | PFA | 8 x M16 | 4 x M16 | 7,8 |
80 | 50 | 190 | 88,9 | 138 | 160 | 3,0 | 23,0 | 39,0 | 60,3 | 102 | 125 | 3,0 | 21,0 | 39,0 | PTFE | 8 x M16 | 4 x M16 | 8,8 |
80 | 65 | 190 | 88,9 | 138 | 160 | 3,0 | 23,0 | 39,0 | 76,1 | 122 | 145 | 3,0 | 21,0 | 39,0 | PTFE | 8 x M16 | 8 x M16 | 9,7 |
100 | 50 | 200 | 114,3 | 158 | 180 | 4,0 | 24,0 | 44,0 | 60,3 | 102 | 125 | 4,0 | 22,0 | 40,0 | PFA | 8 x M16 | 4 x M16 | 10,0 |
100 | 65 | 200 | 114,3 | 158 | 180 | 4,5 | 24,5 | 44,5 | 76,1 | 122 | 145 | 4,5 | 22,5 | 40,5 | PTFE | 8 x M16 | 8 x M16 | 10,9 |
100 | 80 | 205 | 114,3 | 158 | 180 | 4,5 | 24,5 | 44,5 | 88,9 | 138 | 160 | 4,5 | 24,5 | 40,5 | PTFE | 8 x M16 | 8 x M16 | 11,9 |
125 | 65 | 230 | 139,7 | 188 | 210 | 4,0 | 26,0 | 44,0 | 76,1 | 122 | 145 | 4,0 | 22,0 | 40,0 | PFA | 8 x M16 | 8 x M16 | 14,1 |
125 | 80 | 235 | 139,7 | 188 | 210 | 4,0 | 26,0 | 44,0 | 88,9 | 138 | 160 | 4,0 | 24,0 | 40,0 | PFA | 8 x M16 | 8 x M16 | 15,1 |
125 | 100 | 235 | 139,7 | 188 | 210 | 4,5 | 26,5 | 44,5 | 114,3 | 158 | 180 | 4,5 | 24,5 | 44,5 | PTFE | 8 x M16 | 8 x M16 | 16,5 |
150 | 80 | 250 | 168,3 | 212 | 240 | 4,0 | 26,0 | 48,0 | 88,9 | 138 | 160 | 4,0 | 24,0 | 40,0 | PFA | 8 x M20 | 8 x M16 | 18,1 |
150 | 100 | 250 | 168,3 | 212 | 240 | 6,0 | 28,0 | 50,0 | 114,3 | 158 | 180 | 6,0 | 26,0 | 46,0 | PTFE | 8 x M20 | 8 x M16 | 19,5 |
150 | 125 | 250 | 168,3 | 212 | 240 | 6,0 | 28,0 | 50,0 | 139,7 | 188 | 210 | 6,0 | 28,0 | 46,0 | PTFE | 8 x M20 | 8 x M16 | 21,5 |
200 | 100 | 270 | 219,1 | 268 | 295 | 6,0 | 30,0 | 50,0 | 114,3 | 158 | 180 | 6,0 | 28,0 | 46,0 | PTFE | 8 x M20 | 8 x M16 | 43,5 |
200 | 125 | 270 | 219,1 | 268 | 295 | 6,0 | 30,0 | 50,0 | 139,7 | 188 | 210 | 6,0 | 28,0 | 46,0 | PTFE | 8 x M20 | 8 x M16 | 49,7 |
200 | 150 | 270 | 219,1 | 268 | 295 | 6,0 | 30,0 | 50,0 | 168,3 | 212 | 240 | 6,0 | 28,0 | 50,0 | PTFE | 8 x M20 | 8 x M20 | 33,0 |
250 | 125 | 305 | 273,0 | 320 | 350 | 6,0 | 32,0 | 54,0 | 139,7 | 188 | 210 | 6,0 | 28,0 | 46,0 | PTFE | 12 x M20 | 8 x M16 | 59,8 |
250 | 150 | 305 | 273,0 | 320 | 350 | 6,0 | 32,0 | 54,0 | 168,3 | 212 | 240 | 6,0 | 30,0 | 50,0 | PTFE | 12 x M20 | 8 x M20 | 67,5 |
250 | 200 | 310 | 273,0 | 320 | 350 | 6,0 | 32,0 | 54,0 | 219,1 | 268 | 295 | 6,0 | 30,0 | 50,0 | PTFE | 12 x M20 | 8 x M20 | 46,9 |
300 | 150 | 330 | 323,9 | 370 | 400 | 6,0 | 32,0 | 54,0 | 168,3 | 212 | 240 | 6,0 | 30,0 | 50,0 | PTFE | 12 x M20 | 8 x M20 | 78,1 |
300 | 200 | 335 | 323,9 | 370 | 400 | 6,0 | 32,0 | 54,0 | 219,1 | 268 | 295 | 6,0 | 30,0 | 50,0 | PTFE | 12 x M20 | 8 x M20 | 91,6 |
300 | 250 | 340 | 323,9 | 370 | 400 | 6,0 | 32,0 | 54,0 | 273,0 | 320 | 350 | 6,0 | 32,0 | 54,0 | PTFE | 12 x M20 | 12 x M20 | 63,2 |
350 | 200 | 465 | 355,6 | 430 | 460 | 7,5 | 37,5 | 59,5 | 219,1 | 268 | 295 | 7,5 | 31,5 | 51,5 | PTFE | 16 x M20 | 8 x M20 | 116,5 |
350 | 250 | 465 | 355,6 | 430 | 460 | 7,5 | 37,5 | 59,5 | 273,0 | 320 | 350 | 7,5 | 33,5 | 55,5 | PTFE | 16 x M20 | 12 x M20 | 129,8 |
350 | 300 | 465 | 355,6 | 430 | 460 | 7,5 | 33,5 | 59,5 | 323,9 | 370 | 400 | 7,5 | 33,5 | 55,5 | PTFE | 16 x M20 | 12 x M20 | 94,9 |
400 | 250 | 495 | 406,4 | 482 | 515 | 7,5 | 39,5 | 63,5 | 273,0 | 320 | 350 | 7,5 | 33,5 | 55,5 | PTFE | 16 x M24 | 12 x M20 | 143,6 |
400 | 300 | 495 | 406,4 | 482 | 515 | 7,5 | 39,5 | 63,5 | 323,9 | 370 | 400 | 7,5 | 33,5 | 55,5 | PTFE | 16 x M24 | 12 x M20 | 165,7 |
400 | 350 | 495 | 406,4 | 482 | 515 | 7,5 | 33,5 | 63,5 | 355,6 | 430 | 460 | 7,5 | 33,5 | 59,5 | PTFE | 16 x M24 | 16 x M20 | 120,9 |
450 | 250 | 495 | 457,0 | 532 | 565 | 8,0 | 44,0 | 68,0 | 273,0 | 320 | 350 | 8,0 | 34,0 | 56,0 | PTFE | 20 x M24 | 12 x M20 | 151,4 |
450 | 300 | 495 | 457,0 | 532 | 565 | 8,0 | 44,0 | 68,0 | 323,9 | 370 | 400 | 8,0 | 34,0 | 56,0 | PTFE | 20 x M24 | 12 x M20 | 173,4 |
450 | 350 | 495 | 457,0 | 532 | 565 | 8,0 | 36,0 | 68,0 | 355,6 | 430 | 460 | 8,0 | 34,0 | 60,0 | PTFE | 20 x M24 | 16 x M20 | 128,4 |
500 | 300 | 650 | 508,0 | 585 | 620 | 8,0 | 46,0 | 72,0 | 323,9 | 370 | 400 | 8,0 | 34,0 | 56,0 | PTFE | 20 x M24 | 12 x M20 | 211,7 |
500 | 350 | 650 | 508,0 | 585 | 620 | 8,0 | 46,0 | 72,0 | 355,6 | 430 | 460 | 8,0 | 38,0 | 60,0 | PTFE | 20 x M24 | 16 x M20 | 241,1 |
500 | 400 | 650 | 508,0 | 585 | 620 | 8,0 | 36,0 | 72,0 | 406,4 | 482 | 515 | 8,0 | 34,0 | 64,0 | PTFE | 20 x M24 | 16 x M24 | 181,9 |
Fettgedruckte Nennweiten-Kombinationen werden als zweiteiliges Bauteil ausgeliefert mit Flanschen fest-fest und fest-los, wobei sich der Losflansch generell auf der DN1- Seite befindet.
Weitere Nennweiten und Baulängen,
sowie andere Ausführungen auf Anfrage.
L = Baulänge
d1 = Rohr-Außendurchmesser
d4 = Dichtleistendurchmesser
K = Lochkreisdurchmesser
smin = Minimale Bördeldicke
a1 = Mindestlänge bei Festflansch und smin
(einteilig: Typ 11, zweiteilig: Typ 01)
a2 = Mindestlänge bei Losflansch und smin
(einteilig: Typen 04/34, zweiteilig: Typen 02/32)
Technische Angaben gültig für Druckstufe PN 10.
a1 und a2 abhängig von Bauweise und Auskleidungsdicke.
| DN | Auskleidung | Mögliches Vakuum | |||
| Standard | dickwandig | 23°C | 150°C | 200°C | |
| 25 |  |  | | ||
| | | |||
| 40 | | | | ||
| | | |||
| 50 | | | | ||
| | | |||
| 80 | | | | ||
| | | |||
| 100 | | | | ||
| | | |||
| 150 | | | | ||
| | | |||
| 200 | | | | ||
| | | |||
| 250 | | | | ||
| | | |||
| 300 | | | | ||
| | | |||
| = | volles Vakuum |
| = | bedingtes Vakuum |
 | = | kein Vakuum |
| Bei nicht aufgeführten Nennweiten gelten die Werte der nächsthöheren Nennweite. | ||