ANSI Flanged Elbows 30° / 60° (Class 150)
The BAUM manufacturing technology with paste-extruded PTFE liner assures an optimum flow and an exact fitting of the liner in the elbow segment.
Materials:
- carbon steel
- stainless steel
Lining materials:
- PTFE (virgin or conductive)
- PP (up to nominal pipe size NPS 12“)
Flanges:
- fix-loose
- fix-fix
- loose-loose
Other pressure rating:
- Class 300
Special features:
- earthing stud/lug
- vent hole extension
- flange stopper
Optional extras:
- final painting
- non-destructive testing
NPS
| L (mm) | d1
(mm) | d4
(mm) | K
(mm) | smin
(mm) | a1
(mm) | a2
(mm) | No. of bolts x thread (UNC) | Weights | ||
30° | 60° | 30° (ca. kg/pc.) | 60° (ca. kg/pc.) | ||||||||
½“ | 45 | 60 | 26.7 | 34.9 | 60.3 | 3.0 | 14.6 | 22.2 | 4 x ½“ | 1.1 | 1.1 |
¾“ | 45 | 60 | 26.7 | 42.9 | 69.9 | 3.0 | 16.2 | 23.7 | 4 x ½“ | 1.7 | 1.8 |
1“ | 45 | 60 | 33.4 | 50.8 | 79.4 | 3.0 | 17.7 | 25.3 | 4 x ½“ | 2.3 | 2.5 |
1¼“ | 51 | 65 | 42.2 | 63.5 | 88.9 | 3.0 | 19.3 | 26.9 | 4 x ½“ | 3.1 | 3.4 |
1½“ | 57 | 70 | 48.3 | 73.0 | 98.4 | 4.0 | 21.9 | 29.5 | 4 x ½“ | 3.8 | 4.0 |
2“ | 64 | 80 | 60.3 | 92.1 | 120.7 | 3.0 | 22.5 | 30.1 | 4 x ⅝“ | 5.7 | 6.0 |
2½“ | 76 | 96 | 73.0 | 104.8 | 139.7 | 4.0 | 26.7 | 34.3 | 4 x ⅝“ | 9.0 | 9.5 |
3“ | 76 | 96 | 88.9 | 127.0 | 152.4 | 4.0 | 28.3 | 35.9 | 4 x ⅝“ | 11.0 | 11.7 |
4“ | 102 | 122 | 114.3 | 157.2 | 190.5 | 4.5 | 28.8 | 36.4 | 8 x ⅝“ | 15.8 | 17.0 |
5“ | 114 | 130 | 141.3 | 185.7 | 215.9 | 5.0 | 29.3 | 36.9 | 8 x ¾“ | 20.5 | 22.5 |
6“ | 127 | 135 | 168.3 | 215.9 | 241.3 | 5.0 | 30.9 | 38.4 | 8 x ¾“ | 26.0 | 29.1 |
8“ | 140 | 155 | 219.1 | 269.9 | 298.5 | 6.0 | 35.0 | 42.6 | 8 x ¾“ | 43.7 | 49.8 |
10“ | 165 | 185 | 273.0 | 323.8 | 362.0 | 6.0 | 36.6 | 46.2 | 12 x ⅞“ | 61.5 | 71.9 |
12“ | 190 | 215 | 323.8 | 381.0 | 431.8 | 5.0 | 37.2 | 46.8 | 12 x ⅞“ | 92.7 | 108.1 |
14“ | 190 | 245 | 355.6 | 412.8 | 476.3 | 6.0 | 41.4 | 51.0 | 12 x 1“ | 121.4 | 141.2 |
16“ | 203 | 275 | 406.4 | 469.9 | 539.8 | 7.0 | 44.0 | 58.6 | 16 x 1“ | 156.5 | 183.5 |
18“ | 240 | 302 | 457.0 | 533.4 | 577.9 | 5.0 | 45.1 | 59.7 | 16 x 1⅛“ | 177.6 | 210.1 |
20“ | 225 | 332 | 508.0 | 584.2 | 635.0 | 5.0 | 48.3 | 62.9 | 20 x 1⅛“ | 218.5 | 258.6 |
Nominal pipe sizes over NPS 20“
up to NPS 1000“ on request.
L = Total length
d1 = Outer diameter of the elbow
d4 = Raised face diameter
K = Bolt circle diameter
smin = Minimum flare thickness
a1 = Minimum length with fixed flange and smin
a2 = Minimum length with loose flange and smin
Technical data valid for the pressure rating Class 150.
a1 and a2 depend on construction type and lining thickness.
| NPS | Lining thickness | Possible vacuum | |||
| standard | thick-walled | 23°C | 150°C | 200°C | |
| 1“ |  | |  | ||
| | | |||
| 1½“ | | | | ||
| | | |||
| 2“ | | | | ||
| | | |||
| 3“ | | | | ||
| | | |||
| 4“ | | | | ||
| | | |||
| 6“ | | | | ||
| | | |||
| 8“ | | | | ||
| | | |||
| 10“ | | | | ||
| | | |||
| 12“ | | | | ||
| | | |||
| = | full vacuum |
| = | limited vacuu |
 | = | no vacuum |
| Please refer to the next higher nominal pipe size if your nominal pipe size is not listed. | ||