ANSI Inclined Spacers (Class 150)
Flexible in every situation! The Inclined Spacers can be delivered in any angle, tapered on one side only or on both sides.
Material:
- PTFE (virgin or conductive)
Other pressure rating:
- Class 300
The standard angle for Inclined Spacer is 3°, other angles on request.
NPS
| L
(mm) | d2
≈ (mm) | d8
(mm) | Weights
(ca. kg/pc.) |
1“ | 15 | 20 | 63 | 0.1 |
1¼“ | 15 | 29 | 73 | 0.1 |
1½“ | 15 | 35 | 83 | 0.1 |
2“ | 20 | 45 | 101 | 0.3 |
2½“ | 20 | 57 | 122 | 0.4 |
3“ | 20 | 70 | 133 | 0.4 |
4“ | 25 | 93 | 170 | 0.9 |
5“ | 25 | 119 | 194 | 1.0 |
6“ | 35 | 144 | 219 | 1.6 |
8“ | 35 | 191 | 273 | 2.2 |
Different nominal pipe sizes
and total lengths on request.
L = Total length
d2 = Inner diameter
d8 = Outer diameter
Technical data valid for the pressure rating Class 150.
| NPS | Lining thickness | Possible vacuum | |||
| standard | thick-walled | 23°C | 150°C | 200°C | |
| 1“ |  | | | ||
| | | |||
| 1½“ | | | | ||
| | | |||
| 2“ | | | | ||
| | | |||
| 3“ | | | | ||
| | | |||
| 4“ | | | | ||
| | | |||
| 6“ | | | | ||
| | | |||
| 8“ | | | | ||
| | | |||
Vacuum resistance:
| = | full vacuum |
 | = | limited vacuu |
 | = | no vacuum |
| Please refer to the next higher nominal pipe size if your nominal pipe size is not listed. | ||