ANSI PTFE Nozzle Liners (Class 150)
PTFE Nozzle Liners protect tank walls during the filling with corrosive media.
Material:
- PTFE (virgin or conductive)
NPS
| Lmax
(mm) | d1
(mm) | d4
(mm) | s
(mm) | Tolerance for d1 ± (mm) | Weights
(ca. kg/m) |
1“ | 6000 | 19 | 50.8 | 3.0 | 2 | 0.3 |
1¼“ | 6000 | 27 | 63.5 | 3.0 | 2 | 0.5 |
1½“ | 6000 | 32 | 73.0 | 4.0 | 2 | 0.8 |
2“ | 6000 | 43 | 92.1 | 4.0 | 3 | 1.1 |
2½“ | 6000 | 51 | 104.8 | 4.0 | 4 | 1.3 |
3“ | 6000 | 66 | 127.0 | 4.0 | 4 | 1.7 |
4“ | 6000 | 89 | 157.2 | 4.0 | 5 | 2.3 |
5“ | 6000 | 114 | 185.7 | 4.5 | 5 | 3.3 |
6“ | 6000 | 139 | 215.9 | 4.5 | 5 | 4.1 |
8“ | 6000 | 182 | 269.9 | 5.0 | 6 | 6.0 |
10“ | 4000 | 225 | 323.8 | 5.0 | 10 | 7.4 |
12“ | 4000 | 283 | 381.0 | 5.0 | 10 | 9.4 |
14“ | 4000 | 316 | 412.8 | 5.0 | 10 | 10.5 |
16“ | 4000 | 363 | 469.9 | 7.5 | 10 | 18.0 |
20“ | 2000 | 468 | 584.2 | 8.0 | 10 | 24.9 |
Different outer diameters of the pipe and
raised face diameters on request.
Lmax = Maximum total length
d1 = Outer diameter of the pipe
d4 = Raised face diameter
s = Lining thickness
Technical data valid for the pressure rating Class 150.