ANSI Ball Check Valves (Class 150)
Ball Check Valves for horizontal or vertical installation reliably prevent the reverse flow of working medium. At the same time, they offer the least possible resistance in the direction of flow.
Materials:
- carbon steel
- stainless steel
Lining material:
- PTFE (virgin or conductive)
Other pressure rating:
- Class 300
Special features:
- earthing stud/lug
- vent hole extension
Optional extras:
- final painting
- non-destructive testing
NPS
| L (mm) | d4 (mm) | K (mm) | No. of bolts x thread (UNC) | Weights (ca. kg/piece) | ||
Form A | Form B | Form A | Form B | ||||
1“ | 178 | 178 | 50.8 | 79.4 | 4 x ½“ | 4.7 | 17.3 |
1¼“ | 190 | 190 | 63.5 | 88.9 | 4 x ½“ | 6.8 | 25.1 |
1½“ | 204 | 204 | 73.0 | 98.4 | 4 x ½“ | 8.7 | 32.0 |
2“ | 228 | 228 | 92.1 | 120.7 | 4 x ⅝“ | 10.3 | 37.9 |
2½“ | 254 | 254 | 104.8 | 139.7 | 4 x ⅝“ | 17.3 | 63.9 |
3“ | 280 | 280 | 127.0 | 152.4 | 4 x ⅝“ | 19.5 | 72.1 |
4“ | 330 | 330 | 157.2 | 190.5 | 8 x ⅝“ | 23.4 | 86.7 |
5“ | 380 | 380 | 185.7 | 215.9 | 8 x ¾“ | 34.0 | 125.6 |
6“ | 406 | 406 | 215.9 | 241.3 | 8 x ¾“ | 45.7 | 168.8 |
8“ | 458 | 458 | 269.9 | 298.5 | 8 x ¾“ | 70.5 | 260.8 |
Different nominal pipe sizes
and total lengths on request.
L = Total length
d4 = Raised face diameter
K = Bolt circle diameter
Technical data valid for the pressure rating Class 150.
NPS | Lining thickness | Possible vacuum | |||
standard | thick-walled | 23°C | 150°C | 200°C | |
1“ | |||||
1½“ | |||||
2“ | |||||
3“ | |||||
4“ | |||||
6“ | |||||
8“ | |||||
= | full vacuum | |
= | limited vacuu | |
= | no vacuum | |
Please refer to the next higher nominal pipe size if your nominal pipe size is not listed. |